The Autotron...........

Utilizing induction heating for safe flameless windshield removal, side molding removal, and the safe removal of SMC panels and other adhesive bonded automotive parts! 

Remove all types of automotive glass quickly without knives or wire!
Quickly remove side moldings with adhesive intact!  Reuse original OEM tape!

An Induction Heater Saves You Time!!!

• R&I your own automotive glass in less than 0.3 hours
• Remove stubborn graphics & stripes in seconds (Glue is removed with stripe)
• Quickly remove spay-in bedliners with little effort
• R&I side mouldings in less the 0.1 hours, (re-use original OEM tape)

An Induction Heater Saves You Money!!!

• Induction Heaters safely remove adhesive bonded components (roof panels, appliques, etc...) for reuse
• Induction Heaters reduce the need for rubber/abrasive wheels and other consumables
• Induction Heaters perform tasks that previously could not be done with traditional heat sources

An Induction Heater Improves Quality & Safety!!!

• Induction Heaters only heat metal objects
• Induction Heaters will not burn or melt glass, paint, plastic, or other nonmetallic materials
• Induction Heaters will rapidly heat rusted fasteners without open flame, allowing work near plastic and other sensitive areas.

What is an Induction Heater and how does it work?

• Induction Heaters are known by several different names.  One of the more common names is Heat Inductor.
• Heat Inductors are nothing more than a high frequency AC inverter.
• The Heat Inductor produces high frequency electrical currents that are used to power various heating attachments.
• The heating attachments are also know as inductor heads.
• The high frequency current from the Heat Inductor creates magnetic fields at the end of the inductor heads.
• The magnetic field created by the Heat Inductor causes metal object to produce internal heat.
• The inductor heads do not get hot.
• The internal heat produced by the metal object is a result of induced electrical currents in the area where the inductor head is placed.
• Heat Inductors work much like an electrical transformer with the inductor head being the primary of the transformer and the metal object being the secondary of the transformer circuit.
• The heat produced by the Heat Inductor is ideal for the removal of all types of adhesive bonded automotive parts
• Heat Inductors have 100's of autobody repair and industrial applications.

Induction Heating Applications

The Autotron induction heater can be used for many automotive collision repair applications such as glass removal, side molding removal, stripe removal, heating rusted fasteners, spay-in bed liner removal and many others.  Click on the photos below for details.

100's of Uses !!!

• Spray-in bed liner removal
• Caulking and seam sealer removal
• Instantly cure  high solids 1k and 2k primers
• Easily remove bonded roof panels and other SMC's
• Paintless dent repair
• Flameless frame rail heating
• R&I core support labels
• R&I underhood labels for belt, hose and AC routing
• R&I serial number labels located in door jams
• Remove vinyl stripes without solvent or rubber wheels
• Debond rearview mirror brackets
• Rapidly cure panel bonding adheasive
• Strip Paint
• Solder large electrical connectors as found on hybrid vehicles
• Shrink fit bearings and gears
• Loosen tie-rod ends
• Removal of old body filler
• Metal Shrinking
• Bending and Forming
• Vinyl black trim removal from upper door frames between front and rear windows
• Loosen studs with thread locking compounds lie the ones holding roof racks in place
• Easily remove torx bolt found in truck bed boxes and seat belts
• R&I plastic vent shades, while removing all the tape from the vehicle
• R&I OE and aftermarket fender flares... re-use the original tape
• Easily remove after market chrome rocker panels
• Thermally expand bearings and pulleys for easy installation, eliminating the need to press them on.